Things you have to pay attention when using fiber laser cutting machines

A fiber laser cutting machine is a laser cutting machine that uses a fiber laser generator as a light source. The fiber laser is a new type of fiber laser that is newly developed in the world to output a high-energy-density laser beam, which is concentrated on the surface of the workpiece, so that the area irradiated by the ultra-fine focus spot on the workpiece is instantly melted and vaporized, and the spot is moved by the numerical control mechanical system. The automatic cutting of the contactless processing is realized by the irradiation position, and the speed is fast and the precision is high. However, fiber laser cutting machines are not omnipotent. Perfect equipment will have its shortcomings. We should pay attention to its own limitations, such as processed materials, while seeing its superior processing performance. Attribute restrictions, strict processing specification requirements, etc. Rildo standard fiber laser cutting machine Let me talk about the processing of fiber laser cutting machines. Before the fiber laser cutting machine was mainly in the processing category of metal laser cutting machine, it mainly cut metal, such as stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet, galvanized sheet, acid. Washing plates, copper, silver, gold, titanium and other metal sheets and pipes. However, with the development of technology, technologies in non-metal cutting such as plastics, composite materials and plexiglass have matured. Secondly, the fiber laser cutting machine does not recommend long-term cutting of rare metal materials such as aluminum and copper. Although the effect of processing these materials is really good, these materials are all highly reflective materials (Note: high reflection is not related to the smoothness of the cut surface of the sheet. Large, mainly because the wavelength of the laser is not within the ideal absorption range of these materials, the absorption effect is not good, most of the energy is reflected back, it is easy to damage the protective lens in front of the laser head), long-term effects on these materials may affect the use The longevity results in poor subsequent processing and increases the amount of consumables used. Finally, the fiber laser cutting machine varies according to its power, and the cutting thickness also changes. The higher the power, the larger the cutting thickness. The thinner the metal material, the faster the cutting speed. The fiber laser cutting machine has obvious advantages for thin plate cutting. Let’s talk about the processing specifications of fiber laser cutting machine. Since the price of fiber laser cutting machine is not very close to the people in China, it is necessary to process and maintain the machine frequently in the process of use, so as to extend the service life of the machine. To maximize the efficiency of the equipment. First of all, the steel strip must be inspected frequently. The steel belt plays a very important role in the operation of the laser cutting machine, and the steel belt must be tightened when the equipment is running. Otherwise, once there is a problem in the operation, there is a great possibility that it will hurt people, and even seriously threaten the personal safety of the staff. The steel belt seems to be just a small thing, but once it goes wrong, it will seriously affect the safety of production. Secondly, since the laser cutting machine directly vaporizes the metal surface during cutting, a lot of dust is often generated on the surface and inside of the cutting machine. We should always use a vacuum cleaner to suck out the dust, so as to ensure the internal of the machine. There is no magazine pollution between parts, which better maintains normal operation between parts and reduces mechanical wear. In addition, it is necessary to lubricate the rack, the guide rail and the parts of many cutting machines from time to time, so as to stabilize the accuracy of the gear in the running, so that the mechanical operation is always in the normal running track, and cut out. The accuracy of the product is of course higher.